Hello everybody! Everyone knows that computers are a complex system consisting of components: a video card, a motherboard, and many other integral parts. How to cool the most ardent part of the system - the processor! There's a great invention for that: a cooler! And today I will tell you how to choose a cooler and which manufacturer you need to look at.
How to choose a CPU cooler?
First, let's define the goals, how intensively you will use the computer. Use office applications, play games, or will you use aggressively overclocking the processor?
- The most common option for desktop computers is a simple cooler without heat pipes, usually they have enough power for cooling, but when running applications such as Microsoft Office, a browser or minor games, when your computer is running at its minimum.
- But what if you are an avid gamer and love to run games like Crysis 3? In this case, the second option is used - these are coolers for cooling on heat pipes or with a cooling liquid. Such a cooler is based on the removal of heat from the processor, by means of the liquid in the tube and converts it into steam, which dissipates. The most important thing is the copper plate, which is in contact with the processor and removes heat.
Bottom line: the first option is suitable for those who do not load the computer and work on it in normal mode, but if the computer was purchased for gaming, then either a tower cooler or water-cooled one is needed.
Weight, dimensions and characteristics.
When choosing a cooler, you need to pay attention to several more important aspects:
- Size and weight, they should not exceed 700-750 grams, because there is a load on, which can cause its deformation.
- Socket compatibility... Before buying a cooler, you need to look at which socket your motherboard has. cooler mounts are quite individual. The socket is the platform where the processor is installed, so if you buy a cooler for the wrong advice, you will not be able to attach it to the motherboard.
- Dimensions: width, height.It is also a very important factor, since installation may be difficult. And even if the cooler fits into the case, it is not a fact that you can insert RAM.
- Active or passive cooling (preferably active).There are, of course, cool coolers with passive cooling, but all modern motherboards can adjust the speed. Therefore, if you are worried about noise, then even with an active cooler, you may not hear anything.
- Radiator types - tower and standard.Tower coolers dissipate heat well, unlike conventional coolers. For this, if possible, take the tower. But if your budget is limited and you do not actively use a computer, then a regular cooler will do. Tower coolers are also different, but don't bother, take the type shown below.
- Noise level - of course, the quieter the better and more comfortable. Everything is simple here, you need a good manufacturer and so that the motherboard supports automatic cooler speed control.
- Material.There are 3 types. These are copper, aluminum and aluminum + copper. It is better to take copper alone, it will best remove heat.
- Number of coolers.If you are not going to overclock anything, one cooler is enough for you. Just in any case, take one that has the ability to install another one. For example Zalman perfom.
Best cooler manufacturers
Here many will probably refute me, but I will tell from my own experience. And my many years of experience says that the best cooler manufacturers are Noctua, Zalman and Thermaltake. These are the real maniacs of their business, especially Zalman and Noctua ...
And to confirm I will say that they keep the temperature of the 4th generation intel i7 processor, which I have. Well, in games, of course, he gets hot, but! They do well in games! At first I thought it wouldn’t cope, I’ll buy one more fan for the tower cooler, but no, the tower radiator and one fan is enough!
Well, of course, the case also has a great influence, I also have z11 plus, in which the air circulation is also well thought out and hot air does not linger.
So, in my opinion, the best cooler firms are as follows:
1. Zalman this is the undisputed leader, the rest are just trying to compete and parody. Every firm has ups and downs, but in this area this firm has more ups than downs.
2. Noctuathis company is not worse than Zalman, but their price tags are much higher, and if you are not overclocking anything and you have no extra money, then this company is not for you.
3. Thermaltake - are also fanatics of coolers, but in my opinion they lose a little to the zalman, but there are also interesting models. But for example, I only have cooling from zalman, but from thermal tea, tk. they still do them better.
4. Corsair - with this company, I like RAM more.
5. Cooler master - they also make good coolers and cases.
6. GlacialTech - good coolers for the average level of processors.
7. Arctic Cooling - I saw a couple of good tower coolers.
8. Deepcool - cheap and cheerful. An actively developing company.
9. Intel - what can I say, a firm, all firms - a firm. Coolers are supplied in a box with processors. The i3 and i5 are doing well! And of course, about the coolers of their servers, you don't even have to say what they have, what Dell or HP coolers do well. Their server costs so much that it is a sin for them to overheat.
For all that has been said, I would advise you to choose a cooling system for both the processor and all parts of the case, from Zalman!
This is how you can choose the best cooler and keep your computer from overheating... But when the computer overheats, it starts to slow down!
Currently, the most efficient are tower coolers based on copper heat pipes. With proper implementation, three to four heat pipes are enough to provide cooling for any serial processor in the heatsink design. A further increase in the number of pipes in radiators does not always lead to a decrease in peak processor temperatures, so you should not chase after this. The fins of the heatsinks and the heat pipes themselves are usually nickel-plated, which allows them to maintain an almost perfect appearance throughout the entire service life.
When choosing a cooler, you should pay attention to the method of contact of the tubes with the base and radiator fins. If soldering is used (its traces are always clearly visible at the joints), you can entrust your processor with such a device, but simple crimping of plates on tubes and the absence of grooves in the base should be treated with a grain of salt, although soldering is extremely rare in the middle price segment. Coolers with direct contact technology, which have become popular in recent years, are widespread, when the radiator has no base, and its role is played by heat pipes, processed in the base area to a flat surface. In such models, you need to pay attention to the distance between the tubes at the base - the smaller it is, the more uniform the heat exchange will be, which means that the cooler's efficiency will be higher.
Heatsink size really matters. The larger the area of \u200b\u200bthe fins and the greater their number, the higher the area of \u200b\u200bthe radiator and the more heat it can dissipate. Do not underestimate the various types of optimization of radiators - ends of fins of variable height, staggered tubes, but the effect from evaporation chambers or radial radiators is often minimal.
It is worth mentioning also about coolers of the so-called "top-design", in which the radiator is located parallel to the motherboard, and the fan blows the air flow towards its plane. The height of these coolers is small (no more than 150 mm), however, due to design limitations, their area is relatively small, so their efficiency is usually lower than tower coolers. But the air flow of such coolers better cools the elements of the near-processor space and the heatsinks on the motherboard.
Noise level
If the efficiency of even the simplest air coolers turns out to be quite sufficient for the standard operating modes of processors, then their noise level is far from satisfactory to everyone. The only source of noise in air coolers is the fan. In general, you can focus on the following figures: for 80- and 92-mm fans, the speed should be no higher than 1500-1700 rpm; for 120 mm fans - no higher than 1200-1300 rpm; for 140 mm fans and more - no higher than 1000-1200 rpm.
Almost all currently produced cooling systems are equipped with fans with support for automatic speed control, depending on the degree of load on the processor and / or its temperature. Such fans are practically silent at low processor load and at the same time they are sensitive to any increase. The adjustment algorithm is set in the BIOS of the motherboard, or through software.
An important component of the fan is the bearing type. The most common and cheapest is a sleeve bearing, which has a typical life of 30,000 hours, or about 3 years of continuous operation. But in practice, such bearings do not last long, and after half of the service life they begin to make noise. More durable (and expensive) ball bearings, which can last more than 100,000 hours, and with high quality workmanship can maintain low noise levels throughout their life. The compromise option is FDB bearing. They are generally twice as durable as plain bearings and have low noise levels.
Now it is very difficult to imagine life without using computers and various gadgets, because with their help almost everything is available to us. For some it is entertainment, for others it is a way of communication, for others it is a place of work and getting a good income. Since there is demand, then there is progress, today the average personal computer has the performance that prestigious institutions dreamed of just a few years ago. Yes, we ourselves notice that more and more powerful computers appear every year.
High power has a huge disadvantage - heat dissipation. If the load on the processor is high enough, then it consumes more power, and, therefore, generates a large amount of heat. And heat is a problem, because its excess leads to system malfunctions, and frequent and prolonged overheating of the processor can lead to the rapid destruction of the latter, since the processor requires constant cooling, especially if you overclock it heavily. That is why the cooler has become almost the most important part of a computer, though not the most expensive.
How to choose a good cooler for your computer by parameters (4 important points)
Above were listed the most basic aspects, knowledge of which is necessary when buying a cooler. We can only advise that when buying a cooler, touch its blades: they should not have any backlash, and they should also spin easily. Do not forget about the material from which the cooling radiator was made, it is best if it is aluminum.
Now on the market you can find just a huge number of coolers, but the best ones are from THERMALTAKE, COOLER MASTER and XILENCE. Of course, coolers from other companies may not be inferior in quality, but this particular trio is the most famous, and also these companies take care not only about cooling the system, but also think about the problem of excess dust. The aforementioned products from these firms collect less dust on themselves, and all because the coolers are covered with a special coating and made of a special material. This repels dust, which affects the operation of the cooler, and because of this, the temperature of the system, since the more dust accumulates, the more difficult it is for the computer to work.
The processor is the main element in the operation of the computer and is responsible for all the calculations that take place in the system. There is some heat generation or TPD when the stone is in operation. Cooling systems help prevent overheating and keep the processor running. Currently, coolers and LSS are mainly used - liquid cooling systems or, among the common people - dropsy, although there is no water there. Cooling with liquid nitrogen has gained some popularity, but this is an extremely expensive pleasure.
A standard cooler consists of a heatsink and a fan, the number of which may vary depending on the model. The task of the heatsink is to transfer heat from the processor cover to all of its surfaces, increasing the surface with which the air contacts. The fan, however, brings in colder air, displacing hot air. Liquid cooling systems are more compact, more expensive, and better heat dissipation. Distilled water with a variety of additives and impurities that increase the bactericidal and galvanic effect initially acts as a working fluid.
We have selected for you the top 15 best coolers and liquid cooling systems for processors and motherboards.
Best liquid cooling systems
Let's start with the top 5 best liquid cooling systems. If you want to get low temperatures, immediately pay attention to the 3-section options. It is worth noting that in Russia, unfortunately, prices are very high and it makes sense to pay attention to foreign sites. The section is presented by both serial and custom models.
5 ID-COOLING FROSTFLOW + 240
A budget option as a last resort
Country: China
Average price: 3782 rub.
Rating (2018): 4.2
If you have very little money, but you really want LSS, you can take FROSTFLOW + 240. True, we would not advise taking risks and recommended to save up money, and put a tower cooler as a plug. Despite the possibility of cooling the Intel i5 / i7 / i9 processors and the latest Ryzen from AMD, taking a two-section system with a speed of 700-1800 is not the best idea.
The maximum power dissipation here is only 200 W with a pump capacity of 96 liters per hour. Everything would be fine, but its bearing is not hydrodynamic, but ceramic, which influenced the price and overall reliability in general. According to the manufacturer's assurances, the bearing is guaranteed to work its factory 50,000 hours at a noise level of 25 dB, which is not bad for this model.
4 Alphacool Eisbaer LT120
Best single-section LSS
Country: China
Average price: 6438 rub.
Rating (2018): 4.4
A copper radiator with thermal conductivity is almost 2 times higher than that of aluminum, and all this happiness will cost you only 6500 rubles. This is definitely top, and if you take into account that it has a fast locking mechanism for AlphaCool HF, which will expand the dropsy by adding, for example, a video card outline. However, in this case, the LT120 simply will not cope with the simultaneous cooling of both components, so risking is not recommended. Overclocking is out of the question here.
The system will fit all modern sockets, including Intel i5 / i7 and AMD processors along with the new AM4 socket. The rotation speed of the turntable ranges from 550 to 1700 rpm, depending on the mode of use. The noise level is 29 dB, and the pump capacity is 70 l / h.
3 Cooler Master Liquid ML240R RGB
Great appearance
Country: China
Average price: 8930 rub.
Rating (2018): 4.6
Those who like to have a rainbow in the case will definitely like Cooler Master Master Liquid ML240R RGB. For specially, there are 3 types of fans with different speeds, allowing you to combine components for the best effect. The company has learned from the mistakes of the past and the model in the latest revisions flows only in the case of a devil-may-care attitude and lack of care in terms of cleaning, and it is better to buy a filter in addition.
According to customer reviews, there is no difficulty in installation here, which should also be put into the piggy bank of pluses. A nice addition will be a tube of thermal paste included. The turntable mounting parts are completely rubber and are individually screwed to the body, creating a minimal noise floor.
2 NZXT Kraken X62 (RL-KRX62-02)
Choice of buyers
Country: China
Average price: 12172 rub.
Rating (2018): 4.8
NZXT Kraken X62 (RL-KRX62-02) is one of the leaders in sales, but frankly, 12 thousand is an overpayment, albeit for a beautiful appearance. By installing it in the case, you will get a real mirror inside, since the pump is made using the latest technology. The radiator is 240 mm long, which eliminates the need to worry about the temperature of the "stone" under heavy loads.
The radiator is paired with 140 mm fans with good rpm - 500-1800. The contact area with the unit itself is rubberized, which significantly helps to reduce the noise level and eliminate rattling. The pump contact pad is completely copper, and on the back there is a microchannel structure for fast heat dissipation. All hoses are braided, which is good news, and the pump connection has an angle adjuster to adapt to the characteristics of your unit.
There are several global types of coolers:
Boxing... The radiator is small in height and is made mainly of solid aluminum. The fan acts as a cover. The main advantage is low cost in production and manufacturability, which favorably affects the cost. Similar designs are often used by manufacturers when selling kits with processors. For "stones" with heat dissipation up to 65 W, this solution is considered acceptable. "Boxed" variants cannot cope with high rates. Is a dead-end branch.
Tower... By increasing the fan height and adding copper heat pipes to the aluminum bar, heat dissipation can be significantly improved. There are “towers” \u200b\u200bwith both vertical and horizontal fan arrangement. The first option is more widespread, but there are no fundamental differences in efficiency. The efficiency of such a system depends on the diameter of the tubes, their number, and indirectly on the size of the spinner. The more - the better the system will cool the air.
1 Arctic Liquid Freezer 360
6 fans - the best serial LSS
Country: China
Average price: 11705 rubles.
Rating (2018): 5.0
Having bought this dropsy for a very reasonable price, you will get 6 coolers in the kit in addition to the pleasant appearance. Such a colossus will not fit into every box, so carefully measure the dimensions of your system unit before buying.
The water block is made of copper and has impressive dimensions 82x82x40 mm. The air is driven by 120mm fans, producing 74 CFM airflow. The radiator is aluminum and does its job well. The maximum power dissipation is 350 W, and the Freezer 360 itself will perfectly fit on any modern processor. There is no backlight and speed control.
Best boxed coolers
Inexpensive boxed coolers with low power dissipation and saving a lot of space in the case. For such processors as i5-8400, i3-8100, i7-7700 they are quite enough, because there is complete silence even at night and stability does not suffer.
5 Deepcool CK-11508
For office PCs
Country: China
Average price: 290 rubles.
Rating (2018): 4.5
The cheapest and weakest Deepcool CK-11508 in our top is suitable for office machines without overclocking, since it dissipates no more than 65 W of energy, but for such a price you should not expect more. The 92mm fan produces a modest 40.9 CFM airflow. The noise is appropriate - only 25 dB.
According to customer reviews, the model will easily fit on LGA1150 / 1151/1155 / S1156 sockets. The small contact surface is compensated by good screw fastening and downforce, however, be careful not to overdo it, as it can be easily broken.
4 AeroCool BAS
Lowest noise level
Country: China
Average price: 595 rubles.
Rating (2018): 4.6
Received the status of a gaming cooler AeroCool BAS. The maximum power dissipation is 100 W, 95 W processors cannot be driven on it, but it can handle new Ryzen with a TDP of 65 units. The spinner is not adjustable and the number of revolutions is only 1200 per minute. It is not much, but it is enough for all its tasks. The noise level is minimal - 19 dB, thanks to a wide 120 mm cooler.
Due to its compact shape, air intake comes from the side cover of the case, creating an air sweat of up to 55.6 CFM. The radiator is well made, the ribs are not springy.
3 Cooler Master C116 (CP6-9GDSC-0L-GP)
For Intel CPU lovers
Country: China
Average price: 590 rubles.
Rating (2018): 4.7
According to customer reviews, for 590 rubles you get an analog of a boxed cooler, which has a copper core and is standard for Intel processors. Only LGA 775/1151 sockets are supported, but 1151 is compatible with 1150/1156/1155. The model will cope with cooling 95 W processors and below, the compactness and component base are high and does not need criticism. The kit includes an additional mounting plate, and the cooler itself is attached to the motherboard with screws.
The only thing is that the plate itself is made of plastic, because of which it can bend and eventually crack. Speed \u200b\u200bcontrol is only possible with the reobass. Thermal paste has already been applied to the contact surface itself, which means you don't have to fork out for a tube too.
2 Cooler Master CK9-9HDSA-PL-GP
Easy installation, high revs
Country: China
Average price: 800 rubles.
Rating (2018): 4.8
“The more complex the system, the greater the chance of its breakdown,” thought at Cooler Master and released an extremely simple model CK9-9HDSA-PL-GP. Despite the modest size of the fan (95 mm), this variant can spin up to 4200 rpm, creating a powerful air flow with an indicator of 64.1 CFM. There are several nuances to consider when using it.
This "baby" is suitable only for AMD processors with sockets AM2, AM2 +, AM3 / AM3 + / FM1, most of which are outdated. The presence of high revolutions significantly reduced the durability of the bearing and the guaranteed operating time is only 40,000 hours, and under maximum loads it begins to resemble an aircraft turbine.
Liquid cooling systems consist of the following elements:
Water block - heat exchanger;
- water pump
- Storage tank
- Fans
- Hoses and tubes
When choosing an LSS, focus on dropsy with 3 or more units, in which case the differences with conventional tower coolers will be distinguishable. If you are building a small gaming PC, you can also purchase a one-piece version.
Many people take such systems for beauty, often buying dropsy for 4-5 thousand, which is a waste of money. Such models not only do a poor job of their tasks, but also quickly begin to “flow”. In cheap options, the percentage of rejects is higher, but even the most expensive model can leak. The only correct solution would be competent operation.
1 Deepcool ARCHER BIGPRO
The best solution for stock processors
Country: China
Average price: 955 rubles.
Rating (2018): 5.0
For an inexpensive box, we recommend the Deepcool ARCHER BIGPRO. A simple and successful design with support for the new AMD socket AM4 allowed the cooler to establish itself as a popular cooler on the market. Installation takes about 30 seconds with straight arms. The copper core significantly improves heat absorption, resulting in a maximum power dissipation of 125 W.
The multidirectional fins of the radiator have become a good bonus, because of which the heat is evenly distributed over the entire area of \u200b\u200bthe radiator. The turntable is capable of accelerating up to 2000 rpm, pleasing with a low noise level both at the top and at minimum revs. For my money - definitely top.
Best tower coolers
The most popular and demanded segment.
5 Deepcool ICE EDGE MINI FS V2.0
The most budgetary tower
Country: China
Average price: 717 rubles.
Rating (2018): 4.8
Add ICE EDGE MINI FS V2.0 to your PC and keep all Intel and AMD processors cool without overclocking. However, if the overclocking is weak, for example, as on the new ryazhenki, then the cooler can be used, but extremely carefully. In this case, V2.0 will be slightly more efficient than a standard box turntable.
Buyers in their reviews praise the versatility and this is absolutely deserved, since the package contains mounts for all modern processors. The low noise level is also pleasing, although the diameter of the turntable is only 82 mm. 2 copper heatpipes transfer heat to the radiator, which needs to be cleaned frequently as it clogs up quickly. Connection is via a 3-pin connector. It is recommended to carefully approach the installation, since the mounts, especially under the AM3 +, are rather tight.
4 PCcooler GI-X6B
The best cooler for overclocking Ryzen
Country: China
Average price: 1700 rubles.
Rating (2018): 4.9
Beauty, silence, low temperatures are just a small list of the advantages of this model. There are already two fans here and both are 120 mm in diameter. This is enough to dissipate 160 W of heat, since 5 heat pipes can handle it at once. The only problem is the stiff brace.
The color of the blades, heat pipes and lighting caused the price to rise, if you don't care about beauty, you can choose an alternative. In stress tests on Ryzen 1800x, the temperature slowly rises to 85 degrees over half an hour, after which it does not rise at all. In general, we recommend it for connoisseurs and aesthetes.
3 Thermalright AXP-100R
Top solution for low-profile systems
Country: China
Average price: 3770 rubles.
Rating (2018): 4.9
Option for low profile systems. There is simply no better now. 6 heatpipes with 100mm fan are capable of dissipating 125W of heat. There are no backlight and speed controllers. Optionally, it is possible to install a 120 mm turntable. Its height is only 6 centimeters, which greatly saves space inside the case.
The range of rotation is also impressive - from 900 to 2500 rpm. This is not a benchmark, but for everyday tasks and a little overclocking it is fine. The noise level at maximum speed rises to 30 dB, which is generally tolerable.
2 be quiet! DARK ROCK PRO 4
Fighter of liquid cooling systems
Country: China
Average price: 6700 rubles.
Rating (2018): 5.0
2 fans and 7 heat pipes produce a killer 250 watts of power dissipation. He sets records and struggles with dropsies, showing as close as possible, and even superior results of LSS. The equipment is rich, match the price category. A heatsink, turntables, mounting brackets, instructions, a screwdriver, thermal grease and mounts for Intel and AMD - you will find all this inside the package. The body is completely black, there is no hint of backlighting or other excesses.
Compared to the 3rd generation, the "four" has become much easier to install without breaking fingers and the motherboard, Ryzen owners will be especially pleased. Each module consists of 42 aluminum plates, the distance between which is only 2 mm, which is a reference. According to customer reviews, this is a great device, but the price and weight of almost 1 kg greatly narrows the circle of fans of the model.
1 Thermalright Macho 120 Rev. A
Best Professional Overclocking Model
Country: China
Average price: 3160 rubles.
Rating (2018): 5.0
Very quiet (25 dB), compact and easy to install on all modern processors cooler. Will definitely withstand overclocking on all i5 and i7-8700K at 5 GHz. If you are going to buy it for Ryzen, then do not forget about the mounts that need to be purchased separately for the AM4 socket. They cost about 225 rubles. There is also an alternative option. Write to the company's Taiwanese support and provide a photo of the receipt and documents, after which the missing elements will be sent to you for free.
It has almost reference rpm ranging from 600 to 1300 per minute. The number of heatpipes is 5. The massive heatsink has had a negative impact on the weight and now it is 754 grams. Be careful when installing on the motherboard, because nowadays PCB is very thin. A small nuance - there is a Direct version on sale with a 140 mm fan, which has better cooling and costs only 200 rubles more. There is also revision B, already with 6 pipes.
How to choose a processor cooling system?
When choosing a cooler, rely on several important points:
- Dimensions. Before buying, measure the width of your case, if you are going to take a "tower". Many powerful cooler models have large dimensions and may simply not fit into the case.
- Heat dissipation of the processor. Choose a cooling system that can cope with the heat generated by your stone. If the TDP of the "stone" is 95 W, then you should pay attention to the models with a power dissipation of about 110 W. When overclocking on a similar processor, you need to consider options from 120 W and more - it all depends on how hard you are going to "drive" the processor.
Let's touch on some of the nuances when buying:
- Distance between plates. The larger it is, the less pressure is needed for air circulation. The optimal distance is 1.5-2 mm.
- The higher the radiator area, the higher the heat dissipation efficiency.
Summarizing:
- If the processor is not for overclocking, then choose a radiator 4-5 cm thick, with 3-4 pipes and 120-140 mm fans with a maximum low-speed fan. From 300-400 rpm.
- With a heat dissipation of more than 120-140 W, you need to go in the width of the radiator and more than one wide radiator cannot be quieter than a thin one, but this condition is leveled with large fan sizes.
If you are going to replace the cooler that comes with the processor, then you need to pay attention to the type and manufacturer of the processor, since not all coolers are suitable for every processor.
The cooler is not attached directly to the processor. There should also be a radiator between them, which can also be purchased separately. Pay attention to the material from which the radiator battery of the cooler you like is made of. A radiator with copper plates (reddish-yellow metal) removes heat from the stone better, but will cost you more. An aluminum radiator (white metal) is cheaper, but has less thermal conductivity. In addition, the radiators are different: parallel plates or fanned plates. Strongly radiators and the size of the plates. On the one hand, the radiator copes with heat dissipation more efficiently, but on the other hand, it is heavier, more massive and creates a tipping moment for the entire radiator-cooler system. This is especially critical when the motherboard is vertically located in the case.
Floor fan adjustment is an important point. Adjusting the height of the foot or the level of the tilt of the upper part of the fan should be comfortable and not difficult.
A good fan has several blade rotation modes, usually three, which allows you to select the optimal blowing power.
What to look for
Check the stability of the floor fan, it should not wobble on a level surface. The blades must be covered with a strong grate on both sides. At the same time, it is important that the cells are as small as possible - so the fan will be safe for children who like to explore everything.
The timer is a very convenient function, it is not available in all models. Better to overpay a little and buy a fan with a timer. So you can set the time to turn the device on and off and go to bed peacefully without risking freezing at night and getting sick. This is especially true in children's rooms.
There are models with a remote control, but they are more expensive and do not belong to the budget. Although the presence of a remote control greatly simplifies the use of the fan.
During operation, the fan should not knock, creak and make other extraneous sounds. Check the build quality, for this it is better to go to a regular store rather than buying on the Internet.
And of course the fan must have a quality certificate indicating its safety and durability. Make sure that the selected model has a warranty card with the address of the service center, where you can contact in case of a breakdown.
You shouldn't chase famous brands and overpay for the brand. After all, there are less "promoted" firms that produce excellent products.
Considering the criteria and parameters listed above, you can choose a high-quality and budget fan model that will serve you for many years. Happy choice!
